
Pet Door Integration
Cutting a pet door into a security door is easy to do badly. Done properly, the opening sits in a solid lower panel — not in the mesh — the frame keeps its strength, the flap seals, and the door still locks and operates exactly as it should.
Quick answers
Often yes. Suitability depends on the door or screen type, the frame configuration, your pet's size and the security requirement for that opening.
Flap and lockable pet doors sized for cats through to larger dogs, integrated into suitable security doors and screens rather than cut into an unsuitable panel.
Sometimes. We assess the existing frame, mesh type and condition first — some products are not suitable and are better replaced.
Any opening changes the panel, which is why placement, sizing and frame support are assessed before we recommend an approach.
Rockingham, Baldivis, Mandurah and Greater Perth, including Kwinana, Port Kennedy, Secret Harbour, Warnbro, Waikiki, Safety Bay, Shoalwater, the Peel region and southern Perth suburbs.
Why choose this solution
A security door gets its strength from the perimeter frame and the way the mesh is retained. Put a hole in the wrong place and you have removed the thing that makes it a security door. We specify a solid infill panel at the bottom of the leaf, position the pet door within that panel with adequate margins, and keep the mesh area and locking hardware intact. On sliding screens we assess the stile widths and roller loading first, because not every sliding screen is a suitable host.
Where work involves an existing product Halo did not supply, any repair or rectification is subject to inspection, product suitability and availability of suitable parts. Halo does not assume responsibility for the original product, installation or pre-existing defects.
Residential
Commercial
Benefits
Security performance retained
Correct height for the animal
Weather and insect sealing
Lockable flap options
Neat, finished appearance
No mesh cut and taped over
Available Options
The following is provided as general guidance. Final recommendations follow a site consultation and are tailored to your property and requirements.
Pet Door Size
Flap Type
Host Door
Why Halo
We tell you honestly when a door isn't a suitable host.
Opening positioned within a solid panel, never mid-mesh.
Height set to the animal, not to a standard template.
Frame strength and locking hardware left intact.
Clean, sealed finish that still looks factory-made.
Local support if the flap needs adjusting later.
Frequently Asked Questions
Often yes, if the door has — or can take — a solid lower panel and the frame allows it. If the door is full-mesh with narrow stiles, cutting it would compromise the security performance, and we'll say so rather than do it.
Not when it's fitted into a properly sized solid infill panel with correct margins. It does weaken the door badly if it's cut through the mesh area or too close to the frame, which is why placement is the whole job.
Yes. Lockable and two-way flap options are available so you can close it off at night or while you're away.
Generally set so your pet steps through comfortably without ducking or climbing. We measure the animal's shoulder height at the appointment where possible.
A correctly sized pet door in a solid panel is a small opening low on the door. Larger openings deserve more thought, and we'll discuss placement, sightlines and lockable flaps with you.
Yes, and it's the tidier result. Ordering the door with the panel and pet-door aperture built in avoids any on-site cutting.
Related Services
Helpful next steps
Request a Quote
Tell us about the property and what you would like to improve, and we will be in touch to arrange an on-site measure and written quote.